BM17 diode laser hair removal technology based on the selective dynamics of light and heat. This machine adoupt  imported germany laser bar, the work head could use 50,00000 shotting time, It is fast and safety for body hair removal.

diode laser hair removal

. Adopt Germany 600W diode array.

. The technology of sapphire crystal and special coating can enhance light transmission and uniformity, otherwise, light leak will influence laser and the skin cooling effect.

.The technology of efficient TEC and constant temperature control can fully cool the treated areas to avoid pricking during treatment and the danger of thermal damage to the epidermis,achieving the effect of painfree hair removal.

.Professional physical design and special electroplating process to keep the stability andefficiency of the laser as well as cooling effect, meanwhile to protecting the laser from damages caused by cooling water pollution, lack of water and other factors.

.Semiconductor cooling water tank and high quality air cooling radiator to meet the cooling demands of laser device and skin cooling in severe and poor working environment.

. high -capacity and high pressure water pump to make the sufficient water circulation and heat dissipation when laser devise is working, so that the laser can work safely and reliably.

. Using water flow sensor, prevent the laser and TEC from fatal injuries caused by lack of water.

. Using water quality sensor, avoid reduction of laser’s service life caused by water pollution

 6(5).jpg

Applications:

(1) suitable for all skin types get rid of unwanted hair; 

(2) shrink pores, tighten skin; 

(3) vasodilation, varicose veins

5.jpg

7.jpg

Features:

1. Sapphire contact cooling device, the skin temperature cooled to-5-0C, avoide skin thermal injury.

2. Micro-channel cooling semiconductor array technology to ensure high-frequency laser emission at 10HZ even under very stable;

3. The best laser hair removal wavelength, 808nm laser and water it absorbs less hemoglobin, melanin absorption peak is high, making treatment more secure;

4. Long adjustable pulse width to ensure uniform energy output, mild heating, in order to avoid burns the skin and easy to get rid of hair thickness, suitable for all skin types get rid of unwanted hair;

5. Imported semiconductor laser, a light stable, long life;

 

 

 8.jpg

Laser hair removal system parameter:

Laser Type

808nm diode laser hair removal machine

Wavelength

808nm

Energy Density

1-166J/cm2 (Continuously adjustable)

Spot Size

12x12mm2 (Diode Laser) +20x20mm cool head

Pulse Repetition Rate

10Hz

Pulse Duration

10-400ms

Cooling

Continuous Crystal contact cooling (-10~1℃ )

+ Air cooling

+ Closed water circulation cooling

Stand-by Working

Continuously for 20 hours

Display

10" True Color LCD Touch Screen

Electrical Requirements

100-240VAC, 20A max., 50/60Hz

Net Weight

65kg

Dimensions (WxDxH)

48*59*65cm

 

 

Disclaimer: Results may not be typical or expected for everybody. The information contained in this website for your reference.

 

Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation,  safe technology for fast  hair removal now.

808nm diode laser is performed using gold standard 808nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-ChillTip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.

808nm diode laser working principle

Disclaimer: The actual effect varies from person to person

 

Disclaimer: Results may not be typical or expected for everybody. The information contained in this website for your reference.

How does laser hair removal work?
Our laser hair removal system uses a combination of energy and heat to destroy follicles without harming the skin around them. After a series of sessions, you’ll experience permanent hair reduction. Depending which area(s) you decide to treat, you’ll always be ready to slip into a swimsuit, won’t have to think about razor burn or irritation, and will stop worrying about unsightly ingrown hairs.

 

How long does laser hair removal take?
You have millions of hair follicles in your body, all of which cycle through different phases. Laser hair removal can only treat a certain percentage of those follicles at a time (those that are in the active phase), so it must be done at varied intervals. Because no two bodies are the same, your treatment plan will be tailored specifically to you, but we typically recommend at least six laser hair removal sessions that take place four to ten weeks apart.

 

How should I prepare for laser hair removal?
With laser hair removal, nobody will know you’re undergoing treatment (unless, of course, you want them to). Laser hair removal sessions can be as short as fifteen minutes, and we just ask that you stay out of the sun, shave the area to be treated; and avoid using lotions, creams or products, for optimum results.

 

What does laser hair removal feel like?
Most clients describe the sensation as a mild “hot pinch,” similar to the feeling of being snapped with a rubber band. In most cases, the sensation goes away almost immediately.

 

Who qualifies for laser hair removal?
We customize your laser hair removal treatment to match your hair color, skin color and type. As long as there is some color in your hair (in most cases, even blond hair has enough color), then our laser hair removal system will be effective.